roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 6, 2021 21:59:34 GMT 1, Hey guys! Whats your opinion... A bit of colour has been brushed off on my MOCAD print - need to chill myself, is it a huge problem? I found a restoration expert so they could help me with it - but do you think retouch is the way? Or shall I leave as it is? Please someone calm my mind about this lol.
Hey guys! Whats your opinion... A bit of colour has been brushed off on my MOCAD print - need to chill myself, is it a huge problem? I found a restoration expert so they could help me with it - but do you think retouch is the way? Or shall I leave as it is? Please someone calm my mind about this lol.
|
|
|
|
Woodey1001
New Member
🗨️ 662
👍🏻 265
September 2014
|
KAWS Restoration/Leave it as it is?!, by Woodey1001 on Feb 6, 2021 23:28:44 GMT 1, It's so small and to the right of the signature.
Ruler + Scalpel job. Just trim it down that side.
It's so small and to the right of the signature.
Ruler + Scalpel job. Just trim it down that side.
|
|
Deleted
🗨️ 0
👍🏻
January 1970
|
KAWS Restoration/Leave it as it is?!, by Deleted on Feb 6, 2021 23:40:23 GMT 1, It's so small and to the right of the signature. Ruler + Scalpel job. Just trim it down that side.
Literally the worst advice ever 😂
It's so small and to the right of the signature. Ruler + Scalpel job. Just trim it down that side. Literally the worst advice ever 😂 |
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 6, 2021 23:41:45 GMT 1, It's so small and to the right of the signature. Ruler + Scalpel job. Just trim it down that side. Literally the worst advice ever 😂
😂🙏🏼❤️
It's so small and to the right of the signature. Ruler + Scalpel job. Just trim it down that side. Literally the worst advice ever 😂 😂🙏🏼❤️ |
|
Woodey1001
New Member
🗨️ 662
👍🏻 265
September 2014
|
KAWS Restoration/Leave it as it is?!, by Woodey1001 on Feb 6, 2021 23:44:12 GMT 1, It's so small and to the right of the signature. Ruler + Scalpel job. Just trim it down that side. Literally the worst advice ever 😂
nah It's good advice. Nobody measures prints. And even if they did and it was a few mils out. Get a life, who cares.
You don't have a damaged print then. Like new 👌
It's so small and to the right of the signature. Ruler + Scalpel job. Just trim it down that side. Literally the worst advice ever 😂 nah It's good advice. Nobody measures prints. And even if they did and it was a few mils out. Get a life, who cares. You don't have a damaged print then. Like new 👌 |
|
|
|
Woodey1001
New Member
🗨️ 662
👍🏻 265
September 2014
|
KAWS Restoration/Leave it as it is?!, by Woodey1001 on Feb 6, 2021 23:45:44 GMT 1, Lucky with the placement of this I'd say
Lucky with the placement of this I'd say
|
|
Deleted
🗨️ 0
👍🏻
January 1970
|
KAWS Restoration/Leave it as it is?!, by Deleted on Feb 6, 2021 23:46:31 GMT 1, Literally the worst advice ever 😂 nah It's good advice. Nobody measures prints. And even if they did and it was a few mils out. Get a life, who cares. You don't have a damaged print then. Like new 👌
I’m guessing your trimming up your £100k banksys daily?
Some people 😂
Literally the worst advice ever 😂 nah It's good advice. Nobody measures prints. And even if they did and it was a few mils out. Get a life, who cares. You don't have a damaged print then. Like new 👌 I’m guessing your trimming up your £100k banksys daily? Some people 😂 |
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 6, 2021 23:48:16 GMT 1, nah It's good advice. Nobody measures prints. And even if they did and it was a few mils out. Get a life, who cares. You don't have a damaged print then. Like new 👌 I’m guessing your trimming up your £100k banksys daily? Some people 😂
Whats your honest opinion? Leave it?
nah It's good advice. Nobody measures prints. And even if they did and it was a few mils out. Get a life, who cares. You don't have a damaged print then. Like new 👌 I’m guessing your trimming up your £100k banksys daily? Some people 😂 Whats your honest opinion? Leave it? |
|
Woodey1001
New Member
🗨️ 662
👍🏻 265
September 2014
|
KAWS Restoration/Leave it as it is?!, by Woodey1001 on Feb 6, 2021 23:49:08 GMT 1, It's for this reason prints weren't full bleed traditionally. So what if its full bleed.
You want to keep the full signature obvs, and not lose the image.
No one is gonna measure it.
It's for this reason prints weren't full bleed traditionally. So what if its full bleed.
You want to keep the full signature obvs, and not lose the image.
No one is gonna measure it.
|
|
Woodey1001
New Member
🗨️ 662
👍🏻 265
September 2014
|
KAWS Restoration/Leave it as it is?!, by Woodey1001 on Feb 6, 2021 23:50:19 GMT 1, I’m guessing your trimming up your £100k banksys daily? Some people 😂 Whats your honest opinion? Leave it?
No it's damaged. At the moment its devalued.
I’m guessing your trimming up your £100k banksys daily? Some people 😂 Whats your honest opinion? Leave it? No it's damaged. At the moment its devalued. |
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 6, 2021 23:51:26 GMT 1, Whats your honest opinion? Leave it? No it's damaged. At the moment its devalued.
By how much? And do u think I shall let an expert do a restoration then?
Whats your honest opinion? Leave it? No it's damaged. At the moment its devalued. By how much? And do u think I shall let an expert do a restoration then? |
|
Woodey1001
New Member
🗨️ 662
👍🏻 265
September 2014
|
KAWS Restoration/Leave it as it is?!, by Woodey1001 on Feb 6, 2021 23:55:45 GMT 1, No it's damaged. At the moment its devalued. By how much? And do u think I shall let an expert do a restoration then?
Anyone buying it will try to knock from 10%-40% off. Or just not buy it at all.
Just trim it. You're lucky it's just that nick on the corner. You can remove that edge to restore it without effecting the signature or image.
No it's damaged. At the moment its devalued. By how much? And do u think I shall let an expert do a restoration then? Anyone buying it will try to knock from 10%-40% off. Or just not buy it at all. Just trim it. You're lucky it's just that nick on the corner. You can remove that edge to restore it without effecting the signature or image. |
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 6, 2021 23:56:54 GMT 1, By how much? And do u think I shall let an expert do a restoration then? Anyone buying it will try to knock from 10%-40% off. Or just not buy it at all. Just trim it. You're lucky it's just that nick on the corner. You can remove that edge to restore it without effecting the signature or image.
I already have it - I was thinking putting a paste around it, so it hides it... Meaning that I put a paste all around the edges so its not visible anymore
By how much? And do u think I shall let an expert do a restoration then? Anyone buying it will try to knock from 10%-40% off. Or just not buy it at all. Just trim it. You're lucky it's just that nick on the corner. You can remove that edge to restore it without effecting the signature or image. I already have it - I was thinking putting a paste around it, so it hides it... Meaning that I put a paste all around the edges so its not visible anymore |
|
|
|
Ruskr
New Member
🗨️ 313
👍🏻 227
December 2015
|
KAWS Restoration/Leave it as it is?!, by Ruskr on Feb 6, 2021 23:57:54 GMT 1, It's so small and to the right of the signature. Ruler + Scalpel job. Just trim it down that side.
I think it’s the best advice i have seen the last few months on UAA. 😂
It's so small and to the right of the signature. Ruler + Scalpel job. Just trim it down that side. I think it’s the best advice i have seen the last few months on UAA. 😂 |
|
Woodey1001
New Member
🗨️ 662
👍🏻 265
September 2014
|
KAWS Restoration/Leave it as it is?!, by Woodey1001 on Feb 6, 2021 23:58:51 GMT 1, I would actually start by taking off a strip to remove half the damage, so what 3-5mils or something? Seeing if that's better. If not livable, a bit more.
And anyway you practice the cut then too 🤷
I would actually start by taking off a strip to remove half the damage, so what 3-5mils or something? Seeing if that's better. If not livable, a bit more.
And anyway you practice the cut then too 🤷
|
|
Ruskr
New Member
🗨️ 313
👍🏻 227
December 2015
|
KAWS Restoration/Leave it as it is?!, by Ruskr on Feb 7, 2021 0:01:58 GMT 1, By how much? And do u think I shall let an expert do a restoration then? Anyone buying it will try to knock from 10%-40% off. Or just not buy it at all. Just trim it. You're lucky it's just that nick on the corner. You can remove that edge to restore it without effecting the signature or image.
And than sell it on the forum and not tell the buyer.
I have many of them, not such good ones like this is.
But the not so good ones are selling sometimes for 2500-3500. So i think it does not make any sense to restore it.
The print is super framed and looks great!!
If it is such a big Problem for you better use a Passepartout and hide the damage )
By how much? And do u think I shall let an expert do a restoration then? Anyone buying it will try to knock from 10%-40% off. Or just not buy it at all. Just trim it. You're lucky it's just that nick on the corner. You can remove that edge to restore it without effecting the signature or image. And than sell it on the forum and not tell the buyer. I have many of them, not such good ones like this is. But the not so good ones are selling sometimes for 2500-3500. So i think it does not make any sense to restore it. The print is super framed and looks great!! If it is such a big Problem for you better use a Passepartout and hide the damage ) |
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 7, 2021 0:04:34 GMT 1, Anyone buying it will try to knock from 10%-40% off. Or just not buy it at all. Just trim it. You're lucky it's just that nick on the corner. You can remove that edge to restore it without effecting the signature or image. And than sell it on the forum and not tell the buyer. I have many of them, not such good ones like this is. But the not so good ones are selling sometimes for 2500-3500. So i think it does not make any sense to restore it. The print is super framed and looks great!!
So you suggest trimming or leaving it like this? Like I hope its not that visible...
Anyone buying it will try to knock from 10%-40% off. Or just not buy it at all. Just trim it. You're lucky it's just that nick on the corner. You can remove that edge to restore it without effecting the signature or image. And than sell it on the forum and not tell the buyer. I have many of them, not such good ones like this is. But the not so good ones are selling sometimes for 2500-3500. So i think it does not make any sense to restore it. The print is super framed and looks great!! So you suggest trimming or leaving it like this? Like I hope its not that visible... |
|
Richy Rich
New Member
🗨️ 624
👍🏻 865
September 2020
|
KAWS Restoration/Leave it as it is?!, by Richy Rich on Feb 7, 2021 0:07:52 GMT 1, Woodey is hands down the best troll on here. First he’s getting everyone riled up claiming that he knows that Banksy Walled Off Sculptures will be getting COA’s in the future. Now he’s advising people to trim the edges off their prints worth £1000’s. Absolute genius. Love it.
Woodey is hands down the best troll on here. First he’s getting everyone riled up claiming that he knows that Banksy Walled Off Sculptures will be getting COA’s in the future. Now he’s advising people to trim the edges off their prints worth £1000’s. Absolute genius. Love it.
|
|
Ruskr
New Member
🗨️ 313
👍🏻 227
December 2015
|
KAWS Restoration/Leave it as it is?!, by Ruskr on Feb 7, 2021 0:08:02 GMT 1, And than sell it on the forum and not tell the buyer. I have many of them, not such good ones like this is. But the not so good ones are selling sometimes for 2500-3500. So i think it does not make any sense to restore it. The print is super framed and looks great!! So you suggest trimming or leaving it like this? Like I hope its not that visible...
Sure not Trim.
www.granit.com/de/passe-partout-frame-18x24-cm-white-373480/
Go to your framer, order a frame with Passepartout and you can hide it.
And than sell it on the forum and not tell the buyer. I have many of them, not such good ones like this is. But the not so good ones are selling sometimes for 2500-3500. So i think it does not make any sense to restore it. The print is super framed and looks great!! So you suggest trimming or leaving it like this? Like I hope its not that visible... Sure not Trim. www.granit.com/de/passe-partout-frame-18x24-cm-white-373480/Go to your framer, order a frame with Passepartout and you can hide it. |
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 7, 2021 0:08:29 GMT 1,
Thats what I was thinking! Hehe
Thats what I was thinking! Hehe |
|
Ruskr
New Member
🗨️ 313
👍🏻 227
December 2015
|
KAWS Restoration/Leave it as it is?!, by Ruskr on Feb 7, 2021 0:14:28 GMT 1, You all realize these are sliced up from a large print series, right?
Really? Never heard about that.
You all realize these are sliced up from a large print series, right? Really? Never heard about that. |
|
|
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 7, 2021 0:14:59 GMT 1, You all realize these are sliced up from a large print series, right? Really? Never heard about that.
Yep! They are cut outs actually
You all realize these are sliced up from a large print series, right? Really? Never heard about that. Yep! They are cut outs actually |
|
Ruskr
New Member
🗨️ 313
👍🏻 227
December 2015
|
KAWS Restoration/Leave it as it is?!, by Ruskr on Feb 7, 2021 0:16:18 GMT 1, Really? Never heard about that. Yep! They are cut outs actually
I was not seerious. It already got discussed a million times on the forum...
Really? Never heard about that. Yep! They are cut outs actually I was not seerious. It already got discussed a million times on the forum... |
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 7, 2021 0:16:45 GMT 1, Yep! They are cut outs actually I was not seerious. It already got discussed a million times on the forum...
Sorry... New here 🤦🏻♂️
Yep! They are cut outs actually I was not seerious. It already got discussed a million times on the forum... Sorry... New here 🤦🏻♂️ |
|
|
|
KAWS Restoration/Leave it as it is?!, by inefficiency of on Feb 7, 2021 0:17:54 GMT 1, Please don’t trim it. 🙏🏻
Please don’t trim it. 🙏🏻
|
|
|
|
KAWS Restoration/Leave it as it is?!, by Charlie Bronson on Feb 7, 2021 0:41:30 GMT 1, Take it to a restorer. Otherwise you’ll think of the corner every time you look at it. Been there and done that. It’s like having a beautiful car with a big scratch on it. See what a professional, highly recommended paper restorer can do. Shouldn’t cost more than $500, although the paint match may take some time which equates to more money.
Out of curiosity, how did that happen? Feel free not to answer if it’s a touchy subject.
Take it to a restorer. Otherwise you’ll think of the corner every time you look at it. Been there and done that. It’s like having a beautiful car with a big scratch on it. See what a professional, highly recommended paper restorer can do. Shouldn’t cost more than $500, although the paint match may take some time which equates to more money.
Out of curiosity, how did that happen? Feel free not to answer if it’s a touchy subject.
|
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 7, 2021 0:46:07 GMT 1, Take it to a restorer. Otherwise you’ll think of the corner every time you look at it. Been there and done that. It’s like having a beautiful car with a big scratch on it. See what a professional, highly recommended paper restorer can do. Shouldn’t cost more than $500, although the paint match may take some time which equates to more money. Out of curiosity, how did that happen? Feel free not to answer if it’s a touchy subject.
It was most probably the framer 🤦🏻♂️will see how it goes... I will bring it in and see ehat they can do about it.
Take it to a restorer. Otherwise you’ll think of the corner every time you look at it. Been there and done that. It’s like having a beautiful car with a big scratch on it. See what a professional, highly recommended paper restorer can do. Shouldn’t cost more than $500, although the paint match may take some time which equates to more money. Out of curiosity, how did that happen? Feel free not to answer if it’s a touchy subject. It was most probably the framer 🤦🏻♂️will see how it goes... I will bring it in and see ehat they can do about it. |
|
roubasss
New Member
🗨️ 31
👍🏻 4
February 2021
|
KAWS Restoration/Leave it as it is?!, by roubasss on Feb 7, 2021 0:48:05 GMT 1, Take it to a restorer. Otherwise you’ll think of the corner every time you look at it. Been there and done that. It’s like having a beautiful car with a big scratch on it. See what a professional, highly recommended paper restorer can do. Shouldn’t cost more than $500, although the paint match may take some time which equates to more money. Out of curiosity, how did that happen? Feel free not to answer if it’s a touchy subject.
And you are right it bothers me, but I am thinking what if it will be worse after retouching... haha
Take it to a restorer. Otherwise you’ll think of the corner every time you look at it. Been there and done that. It’s like having a beautiful car with a big scratch on it. See what a professional, highly recommended paper restorer can do. Shouldn’t cost more than $500, although the paint match may take some time which equates to more money. Out of curiosity, how did that happen? Feel free not to answer if it’s a touchy subject. And you are right it bothers me, but I am thinking what if it will be worse after retouching... haha |
|
|
|
KAWS Restoration/Leave it as it is?!, by Charlie Bronson on Feb 7, 2021 1:21:27 GMT 1, Take it to a restorer. Otherwise you’ll think of the corner every time you look at it. Been there and done that. It’s like having a beautiful car with a big scratch on it. See what a professional, highly recommended paper restorer can do. Shouldn’t cost more than $500, although the paint match may take some time which equates to more money. Out of curiosity, how did that happen? Feel free not to answer if it’s a touchy subject. And you are right it bothers me, but I am thinking what if it will be worse after retouching... haha
If you take it to a reputable paper restorer there’s no way they’d make it worse. They’ll assess the damage and if they have any doubt about improving it, they’ll refuse to do it. I just had a corner of a Kaws print repaired. The corner is white and the damage was minimal, so no paint match was necessary, just some light burring. Cost me $200. It’s key to find a reputable paper restorer. If they can’t improve it they won’t take on the job.
Take it to a restorer. Otherwise you’ll think of the corner every time you look at it. Been there and done that. It’s like having a beautiful car with a big scratch on it. See what a professional, highly recommended paper restorer can do. Shouldn’t cost more than $500, although the paint match may take some time which equates to more money. Out of curiosity, how did that happen? Feel free not to answer if it’s a touchy subject. And you are right it bothers me, but I am thinking what if it will be worse after retouching... haha If you take it to a reputable paper restorer there’s no way they’d make it worse. They’ll assess the damage and if they have any doubt about improving it, they’ll refuse to do it. I just had a corner of a Kaws print repaired. The corner is white and the damage was minimal, so no paint match was necessary, just some light burring. Cost me $200. It’s key to find a reputable paper restorer. If they can’t improve it they won’t take on the job. |
|
