sammyman
New Member
Posts โข 279
Likes โข 6
February 2007
|
|
|
|
|
To return or not to return?, by finsburyparkranger on Nov 7, 2007 18:36:06 GMT 1,
Yeah it should be mint really. Obviously all screenprints have bits of unusual ink here and there, thats part of the process but the corners shouldn't be bent . Unless its a tiny icle bit on the very end i would send it back.
Yeah it should be mint really. Obviously all screenprints have bits of unusual ink here and there, thats part of the process but the corners shouldn't be bent . Unless its a tiny icle bit on the very end i would send it back. |
|
|
|
To return or not to return?, by jonpud on Nov 7, 2007 18:39:59 GMT 1, Depends on how you intend to frame it mate, if its gonna show float mounted then return, if you are framing behind mounting board then don't worry about it. 
If however you are gonna leave it in its tube for next three years as perhaps 800/1000 others will then it don't really matter if the corner is bent or not!! ;D
Depends on how you intend to frame it mate, if its gonna show float mounted then return, if you are framing behind mounting board then don't worry about it. If however you are gonna leave it in its tube for next three years as perhaps 800/1000 others will then it don't really matter if the corner is bent or not!! ;D |
|
JD
Junior Member
Posts โข 1,755
Likes โข 706
June 2007
|
To return or not to return?, by JD on Nov 7, 2007 21:48:22 GMT 1, Return it I think but go in person if you can
Return it I think but go in person if you can
|
|
Harveyn
Forum Guardian
Full Member
Posts โข 7,690
Likes โข 4,844
July 2007
Staff Member
|
To return or not to return?, by Harveyn on Nov 8, 2007 10:31:14 GMT 1, Return it.
Return it.
|
|
f5ers
New Member
Posts โข 563
Likes โข 0
October 2007
|
To return or not to return?, by f5ers on Nov 8, 2007 22:48:36 GMT 1, Bend the other corner to match
Bend the other corner to match
|
|
|
|
greeneny
New Member
Posts โข 118
Likes โข 1
October 2007
|
To return or not to return?, by greeneny on Nov 8, 2007 23:07:45 GMT 1, Return it
Return it
|
|
|
|
To return or not to return?, by melmoth on Nov 8, 2007 23:12:48 GMT 1, I'm convinced that this will the condition of my GIWTBB when I get it some time in late February next year. Regardless of how late it is though, I would still return it.
I'm convinced that this will the condition of my GIWTBB when I get it some time in late February next year. Regardless of how late it is though, I would still return it.
|
|
romanywg
Junior Member
Posts โข 4,093
Likes โข 36
October 2006
|
To return or not to return?, by romanywg on Nov 8, 2007 23:20:19 GMT 1, Return it.
Return it.
|
|
|
|
To return or not to return?, by arcam on Nov 8, 2007 23:22:44 GMT 1, Return it
Return it
|
|
lastpost
Junior Member
Posts โข 1,960
Likes โข 2
April 2007
|
To return or not to return?, by lastpost on Nov 8, 2007 23:26:54 GMT 1, Return...but you may risk not receiving it back for a long time.
I can't really see, but it depends for me on whether it is a full on crease or a curl to the paper, if that makes sense?!
Return...but you may risk not receiving it back for a long time.
I can't really see, but it depends for me on whether it is a full on crease or a curl to the paper, if that makes sense?!
|
|
RBK
Junior Member
Posts โข 2,924
Likes โข 104
September 2006
|
To return or not to return?, by RBK on Nov 8, 2007 23:34:23 GMT 1, lay it flat under a piece of acid-free paper with a heavy book on top of it - should get it out. Think you run the risk of the same thing happening if you get a replacement sent back.
If my solution doesn't get it to your liking - return it. You're entitled to a print in good condition. You would think that by now POW would realize the hassle of all these returns and pack their prints more carefully though.
lay it flat under a piece of acid-free paper with a heavy book on top of it - should get it out. Think you run the risk of the same thing happening if you get a replacement sent back.
If my solution doesn't get it to your liking - return it. You're entitled to a print in good condition. You would think that by now POW would realize the hassle of all these returns and pack their prints more carefully though.
|
|
|
|
To return or not to return?, by mcnuts on Nov 8, 2007 23:49:31 GMT 1, burn it
(somethin different, why not?  )
burn it (somethin different, why not? ) |
|
Rabbitlegs
New Member
Posts โข 347
Likes โข 3
September 2007
|
To return or not to return?, by Rabbitlegs on Nov 9, 2007 0:15:39 GMT 1, Your kiddin right  This tiny crease on the far outer edge?
moisten it. Iron it. Get over it!
Your kiddin right This tiny crease on the far outer edge? moisten it. Iron it. Get over it! |
|
|
|
Glitter G
New Member
Posts โข 246
Likes โข 82
December 2006
|
To return or not to return?, by Glitter G on Nov 9, 2007 1:04:39 GMT 1, I got mine yesterday with exactly the same corner bent and I sent it back today. They should learn to pack it properly.
I got mine yesterday with exactly the same corner bent and I sent it back today. They should learn to pack it properly.
|
|
Dead Elvis
New Member
Posts โข 308
Likes โข 1
August 2007
|
To return or not to return?, by Dead Elvis on Nov 9, 2007 3:06:28 GMT 1, do what I did, leave it out unrolled, then gaze enchanted when your daugter explains why she went over it in felt tip
Have her sign it and put it on ebay.
do what I did, leave it out unrolled, then gaze enchanted when your daugter explains why she went over it in felt tip Have her sign it and put it on ebay. |
|
headphonesex
New Member
Posts โข 580
Likes โข 2
January 2006
|
To return or not to return?, by headphonesex on Nov 9, 2007 3:10:47 GMT 1, It looks like eff all. Just flatten it out & enjoy it.
It looks like eff all. Just flatten it out & enjoy it.
|
|
guest2
Junior Member
Posts โข 2,471
Likes โข 1
December 2006
|
To return or not to return?, by guest2 on Nov 9, 2007 8:59:54 GMT 1, Might bent in the same corner too, I think what must have happened is that that bent a whole batch of them before they packed them? It's too much of a coincidence that they are all bent in the same corner. But really they should have dealt with this problem before packing and sending them out. Mine's been flattened in my browser and it seems to have straightened out though.
Might bent in the same corner too, I think what must have happened is that that bent a whole batch of them before they packed them? It's too much of a coincidence that they are all bent in the same corner. But really they should have dealt with this problem before packing and sending them out. Mine's been flattened in my browser and it seems to have straightened out though.
|
|
|
|
To return or not to return?, by buffin on Nov 9, 2007 9:06:01 GMT 1, Mine's mid 800s and is bent exactly the same. Am going to return it
Mine's mid 800s and is bent exactly the same. Am going to return it
|
|
influence
New Member
Posts โข 205
Likes โข 1
February 2007
|
To return or not to return?, by influence on Nov 9, 2007 9:31:27 GMT 1, I returned for the same reason.
I returned for the same reason.
|
|
|
|
To return or not to return?, by slowmo on Nov 9, 2007 9:35:56 GMT 1, Wish I could see the image, but I can't
Wish I could see the image, but I can't
|
|
Glitter G
New Member
Posts โข 246
Likes โข 82
December 2006
|
To return or not to return?, by Glitter G on Nov 9, 2007 10:24:57 GMT 1, Mine's mid 800s and is bent exactly the same. Am going to return it
Mine's mid 800s as well.
Mine's mid 800s and is bent exactly the same. Am going to return it Mine's mid 800s as well. |
|
|
|
)
This tiny crease on the far outer edge?
๐ธ