sircoxson
New Member
๐จ๏ธ 746
๐๐ป 866
December 2010
|
Pejac โข Linea Print, by sircoxson on Jun 18, 2019 15:36:00 GMT 1, I was interested until i realized it was in the tube for almost three years. 
should not be a problem with the lenticular print. it's different from a print on paper.
I was interested until i realized it was in the tube for almost three years. should not be a problem with the lenticular print. it's different from a print on paper. |
|
Dive Jedi
Junior Member
๐จ๏ธ 6,194
๐๐ป 9,453
October 2015
|
Pejac โข Linea Print, by Dive Jedi on Jun 18, 2019 16:35:38 GMT 1, I was interested until i realized it was in the tube for almost three years. should not be a problem with the lenticular print. it's different from a print on paper.
Earlier comments said it was okay - so I did.
Lately I've seen a few saying it's not okay.
Can we get a final decision on this? 
It's a rather wide tube - wider then a GP.
I was interested until i realized it was in the tube for almost three years. should not be a problem with the lenticular print. it's different from a print on paper. I have seen comments on here contradicting each other concerning keeping Linea in the tube. Earlier comments said it was okay - so I did. Lately I've seen a few saying it's not okay. Can we get a final decision on this? It's a rather wide tube - wider then a GP. |
|
eye like
New Member
๐จ๏ธ 262
๐๐ป 536
September 2015
|
Pejac โข Linea Print, by eye like on Jun 18, 2019 18:19:59 GMT 1, I believe it is a problem, even if it has been in the big tube that they were originally sold in.
My one that I had framed was flattened after it had been in that tube for a few months and appeared to be fine, but after framing by MFM I ended up having to reframe it as the print started to bulge quite severely which really spoiled the lenticular effect. Even now second time round it is slightly convex, which you can only see from the side, but it bothers me. I can't believe this was something that only occurred to this one print.
So I would personally avoid a tubed one, especially if it's been in there since purchase, but others may have had different experiences.
I believe it is a problem, even if it has been in the big tube that they were originally sold in.
My one that I had framed was flattened after it had been in that tube for a few months and appeared to be fine, but after framing by MFM I ended up having to reframe it as the print started to bulge quite severely which really spoiled the lenticular effect. Even now second time round it is slightly convex, which you can only see from the side, but it bothers me. I can't believe this was something that only occurred to this one print.
So I would personally avoid a tubed one, especially if it's been in there since purchase, but others may have had different experiences.
|
|
Winks
Junior Member
๐จ๏ธ 2,802
๐๐ป 3,603
April 2016
|
Pejac โข Linea Print, by Winks on Jun 18, 2019 18:20:37 GMT 1, Itโs plastic, I am reliably informed that it will last 200 years.
Itโs plastic, I am reliably informed that it will last 200 years.
|
|
Graham H
Junior Member
๐จ๏ธ 2,304
๐๐ป 2,417
November 2012
|
Pejac โข Linea Print, by Graham H on Jun 18, 2019 19:18:21 GMT 1, Not sure thats fully down to the tubing / time in the tube. I bought one at release and went straight to framers, but after a short period of time it had done exactly what you have described below - gone slightly convex.. i got a mount put in the frame to hold it in place and it even popped out from that after a period of time
I believe it is a problem, even if it has been in the big tube that they were originally sold in.ย My one that I had framed was flattened after it had been in that tube for a few months and appeared to be fine, but after framing by MFM I ended up having to reframe it as the print started to bulge quite severely which really spoiled the lenticular effect. Even now second time round it is slightly convex, which you can only see from the side, but it bothers me. I can't believe this was something that only occurred to this one print.ย So I would personally avoid a tubed one, especially if it's been in there since purchase, but others may have had different experiences.ย
Not sure thats fully down to the tubing / time in the tube. I bought one at release and went straight to framers, but after a short period of time it had done exactly what you have described below - gone slightly convex.. i got a mount put in the frame to hold it in place and it even popped out from that after a period of time I believe it is a problem, even if it has been in the big tube that they were originally sold in.ย My one that I had framed was flattened after it had been in that tube for a few months and appeared to be fine, but after framing by MFM I ended up having to reframe it as the print started to bulge quite severely which really spoiled the lenticular effect. Even now second time round it is slightly convex, which you can only see from the side, but it bothers me. I can't believe this was something that only occurred to this one print.ย So I would personally avoid a tubed one, especially if it's been in there since purchase, but others may have had different experiences.ย |
|
Icesay
Junior Member
๐จ๏ธ 2,427
๐๐ป 1,796
March 2010
|
Pejac โข Linea Print, by Icesay on Jun 18, 2019 19:31:29 GMT 1, Not sure thats fully down to the tubing / time in the tube. I bought one at release and went straight to farmers, but after a short period of time it had done exactly what you have described below - gone slightly convex.. i got a mount put in the frame to hold it in place and it even popped out from that after a period of time I believe it is a problem, even if it has been in the big tube that they were originally sold in.ย My one that I had framed was flattened after it had been in that tube for a few months and appeared to be fine, but after framing by MFM I ended up having to reframe it as the print started to bulge quite severely which really spoiled the lenticular effect. Even now second time round it is slightly convex, which you can only see from the side, but it bothers me. I can't believe this was something that only occurred to this one print.ย So I would personally avoid a tubed one, especially if it's been in there since purchase, but others may have had different experiences.ย
So basically it's a bit sh1t and warps. Wouldn't be happy if the lenticular was like a hall of mirrors.
Not sure thats fully down to the tubing / time in the tube. I bought one at release and went straight to farmers, but after a short period of time it had done exactly what you have described below - gone slightly convex.. i got a mount put in the frame to hold it in place and it even popped out from that after a period of time I believe it is a problem, even if it has been in the big tube that they were originally sold in.ย My one that I had framed was flattened after it had been in that tube for a few months and appeared to be fine, but after framing by MFM I ended up having to reframe it as the print started to bulge quite severely which really spoiled the lenticular effect. Even now second time round it is slightly convex, which you can only see from the side, but it bothers me. I can't believe this was something that only occurred to this one print.ย So I would personally avoid a tubed one, especially if it's been in there since purchase, but others may have had different experiences.ย So basically it's a bit sh1t and warps. Wouldn't be happy if the lenticular was like a hall of mirrors. |
|
|
|
avec art
Junior Member
๐จ๏ธ 3,727
๐๐ป 3,061
March 2014
|
Pejac โข Linea Print, by avec art on Jun 18, 2019 19:33:03 GMT 1, perhaps one solution is to frame it up to the edge of the frame with it held down by spacers which are hidden under the lip of the frame.
perhaps one solution is to frame it up to the edge of the frame with it held down by spacers which are hidden under the lip of the frame.
|
|
duggyfresh
Junior Member
๐จ๏ธ 1,368
๐๐ป 1,043
February 2013
|
Pejac โข Linea Print, by duggyfresh on Jun 18, 2019 19:34:02 GMT 1, These prints need flattening for a longer time than paper. I had the same issue with mine the first time framing, but Gary took it back and flattened again, now its all good and hasnt curled anymore.
These prints need flattening for a longer time than paper. I had the same issue with mine the first time framing, but Gary took it back and flattened again, now its all good and hasnt curled anymore.
|
|
duggyfresh
Junior Member
๐จ๏ธ 1,368
๐๐ป 1,043
February 2013
|
Pejac โข Linea Print, by duggyfresh on Jun 18, 2019 19:36:02 GMT 1, perhaps one solution is to frame it up to the edge of the frame with it held down by spacers which are hidden under the lip of the frame.
Mine has a frame for mount set into a outer frame if that makes sense.
perhaps one solution is to frame it up to the edge of the frame with it held down by spacers which are hidden under the lip of the frame. Mine has a frame for mount set into a outer frame if that makes sense. |
|
avec art
Junior Member
๐จ๏ธ 3,727
๐๐ป 3,061
March 2014
|
Pejac โข Linea Print, by avec art on Jun 18, 2019 19:50:01 GMT 1, so there are spacers under the mount duggyfresh ? that's not such a bad idea and would give additional depth
so there are spacers under the mount duggyfresh ? that's not such a bad idea and would give additional depth |
|
duggyfresh
Junior Member
๐จ๏ธ 1,368
๐๐ป 1,043
February 2013
|
Pejac โข Linea Print, by duggyfresh on Jun 18, 2019 20:06:19 GMT 1, so there are spacers under the mount duggyfresh ? that's not such a bad idea and would give additional depth
Yeah thin spacers just to stop glass touching the print, then the two frames.
so there are spacers under the mount duggyfresh ? that's not such a bad idea and would give additional depth Yeah thin spacers just to stop glass touching the print, then the two frames. |
|
|
|
Pejac โข Linea Print, by Happy Shopper on Jun 18, 2019 20:24:13 GMT 1, If these are lenticular, made in the usual way and printed on paper with a corrugated plastic layer on top, I canโt see why it canโt be up against the glass and kept flat like that?
If these are lenticular, made in the usual way and printed on paper with a corrugated plastic layer on top, I canโt see why it canโt be up against the glass and kept flat like that?
|
|
Deleted
๐จ๏ธ 0
๐๐ป
January 1970
|
Pejac โข Linea Print, by Deleted on Jul 29, 2019 12:46:41 GMT 1, Back up for sale if any interest ? Many thanks
Back up for sale if any interest ? Many thanks
|
|
Deleted
๐จ๏ธ 0
๐๐ป
January 1970
|
Pejac โข Linea Print, by Deleted on Jul 29, 2019 15:22:05 GMT 1, Pejac linea for sale. Framed with museum glass etc. Comes with Coa ยฃ1750. Dm for info cheers
Pejac linea for sale. Framed with museum glass etc. Comes with Coa ยฃ1750. Dm for info cheers
|
|
|
|
Deleted
๐จ๏ธ 0
๐๐ป
January 1970
|
Pejac โข Linea Print, by Deleted on Aug 1, 2019 7:26:21 GMT 1, Reduced to ยฃ1650 if any interest. Uk shipping or collection only
Reduced to ยฃ1650 if any interest. Uk shipping or collection only
|
|
Deleted
๐จ๏ธ 0
๐๐ป
January 1970
|
Pejac โข Linea Print, by Deleted on Aug 2, 2019 9:47:11 GMT 1, Now sold .... thanks all
Now sold .... thanks all |
|
cyberkid
Junior Member
๐จ๏ธ 2,375
๐๐ป 2,458
January 2015
|
Pejac โข Linea Print, by cyberkid on Aug 6, 2019 15:29:32 GMT 1, Pejac - "Linea" print
Ed. of 200, mint, never framed, coa ยฃ1600 (equivalent โฌ) incl. perfect packing, dhl / fedex / ups shipping (Europe)
based in Germany
pls pm
Pejac - "Linea" print
Ed. of 200, mint, never framed, coa ยฃ1600 (equivalent โฌ) incl. perfect packing, dhl / fedex / ups shipping (Europe) based in Germany pls pm |
|
cyberkid
Junior Member
๐จ๏ธ 2,375
๐๐ป 2,458
January 2015
|
Pejac โข Linea Print, by cyberkid on Aug 11, 2019 13:08:03 GMT 1, sunday bump
sunday bump
|
|
daniel100
New Member
๐จ๏ธ 2
๐๐ป 1
August 2019
|
Pejac โข Linea Print, by daniel100 on Aug 21, 2019 14:59:02 GMT 1, Very interested. PM.
Very interested. PM.
|
|
kad7374
New Member
๐จ๏ธ 179
๐๐ป 82
June 2014
|
Pejac โข Linea Print, by kad7374 on Sept 29, 2019 18:02:01 GMT 1, Hi,
Pejac - linea for sale.
Edition of 200
Professionally Framed by PFG.
Comes with original COA.
Looking for offers over ยฃ1400
Based in Dorset,but could arrange a meet in London or the South Coast.
PM me for further info.
Cheers.
Hi,
Pejac - linea for sale.
Edition of 200
Professionally Framed by PFG.
Comes with original COA.
Looking for offers over ยฃ1400
Based in Dorset,but could arrange a meet in London or the South Coast.
PM me for further info.
Cheers.
|
|
kad7374
New Member
๐จ๏ธ 179
๐๐ป 82
June 2014
|
Pejac โข Linea Print, by kad7374 on Oct 4, 2019 21:42:41 GMT 1, Bumpty, bumpty, bump !
Bumpty, bumpty, bump !
|
|
duggyfresh
Junior Member
๐จ๏ธ 1,368
๐๐ป 1,043
February 2013
|
Pejac โข Linea Print, by duggyfresh on Oct 23, 2019 14:00:58 GMT 1,
Gonefellow boxhead stored flat.
2017
Signed and Numbered
Edition of100
Screen print
Size: 58.0 cm x 77.0 cm
Sirio Ultra Black 280 gsm paper
Supplied with COA
ยฃ550 including UK postage ยฃ575 to Europe plus fees
Addingย
David Kordansky Jonas Wood Interior and Landscapes unfolded poster sold inc delivery.
Pejac A Forest Mini Print ยฃ40 inc delivery.
Invader My Game Is Postcards Sold
Fees on top or gift
Read more:ย urbanartassociation.com/thread/160346/pejac-gonefellow-invader-jonas-wood#ixzz63frgK8SP
Gonefellow boxhead stored flat. 2017 Signed and Numbered Edition of100 Screen print Size: 58.0 cm x 77.0 cm Sirio Ultra Black 280 gsm paper Supplied with COA ยฃ550 including UK postage ยฃ575 to Europe plus fees Addingย David Kordansky Jonas Wood Interior and Landscapes unfolded poster sold inc delivery. Pejac A Forest Mini Print ยฃ40 inc delivery. Invader My Game Is Postcards Sold Fees on top or gift Read more:ย urbanartassociation.com/thread/160346/pejac-gonefellow-invader-jonas-wood#ixzz63frgK8SP |
|
|
|
duggyfresh
Junior Member
๐จ๏ธ 1,368
๐๐ป 1,043
February 2013
|
Pejac โข Linea Print, by duggyfresh on Oct 28, 2019 13:28:36 GMT 1, Happy to go partial trades on the Pejac with some cash to me. Will consider Dface, Whatson, Pez (not mirage or kunoichi) Nick Walker TMA bristol, insect clockwork britain pow.
Happy to go partial trades on the Pejac with some cash to me. Will consider Dface, Whatson, Pez (not mirage or kunoichi) Nick Walker TMA bristol, insect clockwork britain pow.
|
|
tonys
New Member
๐จ๏ธ 428
๐๐ป 346
July 2012
|
Pejac โข Linea Print, by tonys on Oct 28, 2019 14:07:54 GMT 1, For a minute I thought they'd done a collaboration....
For a minute I thought they'd done a collaboration....
|
|
duggyfresh
Junior Member
๐จ๏ธ 1,368
๐๐ป 1,043
February 2013
|
Pejac โข Linea Print, by duggyfresh on Oct 28, 2019 14:17:41 GMT 1, Adding
David Kordansky Jonas Wood Interior and Landscapes unfolded poster ยฃ30 inc delivery.
Pejac A Forest Mini Print ยฃ40 inc delivery.
Invader My Game Is Postcards ยฃ30 inc delivery.
Fees on top or gift.
Adding
David Kordansky Jonas Wood Interior and Landscapes unfolded poster ยฃ30 inc delivery.
Pejac A Forest Mini Print ยฃ40 inc delivery.
Invader My Game Is Postcards ยฃ30 inc delivery.
Fees on top or gift.
|
|
duggyfresh
Junior Member
๐จ๏ธ 1,368
๐๐ป 1,043
February 2013
|
Pejac โข Linea Print, by duggyfresh on Oct 30, 2019 20:50:12 GMT 1, Invader postcards sold pending payment
Invader postcards sold pending payment
|
|
flux
New Member
๐จ๏ธ 16
๐๐ป 9
April 2019
|
Pejac โข Linea Print, by flux on Oct 31, 2019 23:25:35 GMT 1, Pejac Linea is to cheap! Not sold yet?!?
Pejac Linea is to cheap! Not sold yet?!?
|
|
duggyfresh
Junior Member
๐จ๏ธ 1,368
๐๐ป 1,043
February 2013
|
Pejac โข Linea Print, by duggyfresh on Nov 4, 2019 14:34:28 GMT 1, Invader post cards sold other stuff still available. Lots of interest in the pejac regarding unframing and posting. I will need a deposit if you require me to get it unframed.
Invader post cards sold other stuff still available. Lots of interest in the pejac regarding unframing and posting. I will need a deposit if you require me to get it unframed.
|
|
kad7374
New Member
๐จ๏ธ 179
๐๐ป 82
June 2014
|
Pejac โข Linea Print, by kad7374 on Nov 5, 2019 8:19:41 GMT 1, Price reduced!
Price reduced!
|
|
duggyfresh
Junior Member
๐จ๏ธ 1,368
๐๐ป 1,043
February 2013
|
Pejac โข Linea Print, by duggyfresh on Nov 5, 2019 23:22:49 GMT 1, Reduced Boxhead ยฃ525
Reduced Boxhead ยฃ525
|
|
