lrworld
New Member
๐จ๏ธ 84
๐๐ป 0
April 2007
|
My morons got damaged (pic), by lrworld on Apr 23, 2007 23:36:09 GMT 1, 
What should I do? Will this affect the value of my print?
What should I do? Will this affect the value of my print? |
|
|
|
My morons got damaged (pic), by ricosg11 on Apr 23, 2007 23:48:47 GMT 1, send it back and they will replace it. Just email them first
send it back and they will replace it. Just email them first
|
|
|
|
My morons got damaged (pic), by arcam on Apr 23, 2007 23:49:46 GMT 1, send it back and they will replace it. Just email them first
Concur. Mine came with paint on the border, I e-mailed them and they offered to replace it. 
send it back and they will replace it. Just email them first Concur. Mine came with paint on the border, I e-mailed them and they offered to replace it. |
|
|
|
My morons got damaged (pic), by irf2112 on Apr 23, 2007 23:55:21 GMT 1, The hardest print (for me anyhow) to get out of a tube has to be Eines Blue train... I almost gave up...
The hardest print (for me anyhow) to get out of a tube has to be Eines Blue train... I almost gave up...
|
|
|
|
My morons got damaged (pic), by ร
gent รacardi on Apr 23, 2007 23:57:05 GMT 1, I got the exact same dog-ear, at the exact same corner!
Makes me think that a bunch of prints may have been damaged during packing. Grrr.
I got the exact same dog-ear, at the exact same corner!
Makes me think that a bunch of prints may have been damaged during packing. Grrr.
|
|
|
|
My morons got damaged (pic), by arcam on Apr 24, 2007 0:08:07 GMT 1, The hardest print (for me anyhow) to get out of a tube has to be Eines Blue train... I almost gave up...
I was the same with my Morons, it was nerve racking. I've got to go through it again now... 
The hardest print (for me anyhow) to get out of a tube has to be Eines Blue train... I almost gave up... I was the same with my Morons, it was nerve racking. I've got to go through it again now... |
|
|
|
|
|
My morons got damaged (pic), by mammal2 on Apr 24, 2007 0:13:37 GMT 1, A mates came like that too. send it back!
A mates came like that too. send it back!
|
|
|
|
My morons got damaged (pic), by corblimeylimey on Apr 24, 2007 1:14:32 GMT 1, The hardest print (for me anyhow) to get out of a tube has to be Eines Blue train... I almost gave up...
For me it was Applause, a right bugger!
You'll be fine Irworld, POW are very good with damaged returns, I wouldn't keep it if I were you.
The hardest print (for me anyhow) to get out of a tube has to be Eines Blue train... I almost gave up... For me it was Applause, a right bugger! You'll be fine Irworld, POW are very good with damaged returns, I wouldn't keep it if I were you. |
|
rhinomilk
New Member
๐จ๏ธ 120
๐๐ป 2
February 2007
|
My morons got damaged (pic), by rhinomilk on Apr 24, 2007 3:04:57 GMT 1, The hardest print (for me anyhow) to get out of a tube has to be Eines Blue train... I almost gave up...
sometimes i cut the tube itself and tear it away to get to the print/poster
The hardest print (for me anyhow) to get out of a tube has to be Eines Blue train... I almost gave up... sometimes i cut the tube itself and tear it away to get to the print/poster |
|
dwight
New Member
๐จ๏ธ 539
๐๐ป 285
November 2006
|
My morons got damaged (pic), by dwight on Apr 24, 2007 5:05:43 GMT 1, That was exactly how my monsters print was damaged. POW has been very cordial about replacing it, although they are still saying that Eine will get to it soon... Praying my morons isn't damaged...really don't want to have to send something else back.
That was exactly how my monsters print was damaged. POW has been very cordial about replacing it, although they are still saying that Eine will get to it soon... Praying my morons isn't damaged...really don't want to have to send something else back.
|
|
|
|
My morons got damaged (pic), by manchestermike on Apr 24, 2007 9:41:57 GMT 1, That was exactly how my monsters print was damaged. POW has been very cordial about replacing it, although they are still saying that Eine will get to it soon...
He does, still waiting for my red one back... 3 out of 5 monsters had to go back for replacement!
That was exactly how my monsters print was damaged. POW has been very cordial about replacing it, although they are still saying that Eine will get to it soon... He does, still waiting for my red one back... 3 out of 5 monsters had to go back for replacement! |
|
psp500
New Member
๐จ๏ธ 280
๐๐ป 0
June 2006
|
My morons got damaged (pic), by psp500 on Apr 24, 2007 13:59:24 GMT 1, ive never got a damaged print from pow
numbering is another issue, theyve given me right number but out of wrong series a few times
ive never got a damaged print from pow
numbering is another issue, theyve given me right number but out of wrong series a few times
|
|
|
|
My morons got damaged (pic), by slowmo on Apr 24, 2007 14:11:40 GMT 1, That sort of damage is only caused by people removing the print from the tube (imagine a finger and thumb on paper pulling in a direction that tightens the curl so it wont catch on release). So either people are damaging it themselves on removal or POW had to pull a load out to check them for some reason.
That sort of damage is only caused by people removing the print from the tube (imagine a finger and thumb on paper pulling in a direction that tightens the curl so it wont catch on release). So either people are damaging it themselves on removal or POW had to pull a load out to check them for some reason.
|
|
ยฎat
Junior Member
๐จ๏ธ 1,273
๐๐ป 146
October 2006
|
My morons got damaged (pic), by ยฎat on Apr 24, 2007 14:21:39 GMT 1, If it's not rolled up straight, that could easily be caused by the end cap being put on.
Send it back
If it's not rolled up straight, that could easily be caused by the end cap being put on.
Send it back
|
|
|
|
|
|
My morons got damaged (pic), by slowmo on Apr 24, 2007 14:30:05 GMT 1, Not really (althought definitely possible), POW prints are all packed without padding and have clearance in them, so a print does not touch the tip of the tube as you put the lid on. I do agree to send them back because they are willing to replace them, just wondering really if people are honest, how many caused the damage themselves?
Not really (althought definitely possible), POW prints are all packed without padding and have clearance in them, so a print does not touch the tip of the tube as you put the lid on. I do agree to send them back because they are willing to replace them, just wondering really if people are honest, how many caused the damage themselves?
|
|
|
|
My morons got damaged (pic), by slowmo on Apr 24, 2007 14:31:40 GMT 1, Thinking about it a little more, if they roll them and they don't quite fit, they could be the ones doing the squeezing to get it in. Ignore my previous posts
Thinking about it a little more, if they roll them and they don't quite fit, they could be the ones doing the squeezing to get it in. Ignore my previous posts
|
|
|
|
My morons got damaged (pic), by bobbymeachamjr on Apr 24, 2007 14:40:53 GMT 1, Not really (althought definitely possible), POW prints are all packed without padding and have clearance in them, so a print does not touch the tip of the tube as you put the lid on. I do agree to send them back because they are willing to replace them, just wondering really if people are honest, how many caused the damage themselves?
and what do you gain by purposely damaging the print?
Not really (althought definitely possible), POW prints are all packed without padding and have clearance in them, so a print does not touch the tip of the tube as you put the lid on. I do agree to send them back because they are willing to replace them, just wondering really if people are honest, how many caused the damage themselves? and what do you gain by purposely damaging the print? |
|
|
|
My morons got damaged (pic), by slowmo on Apr 24, 2007 14:51:44 GMT 1, Well, you gain nothing, but the unique thing is that if you damage it yourself, you can blame them and get a new one. As I said on the post above though, I guess they could damage it by doing the squeezing.
Well, you gain nothing, but the unique thing is that if you damage it yourself, you can blame them and get a new one. As I said on the post above though, I guess they could damage it by doing the squeezing.
|
|
Curley
Junior Member
๐จ๏ธ 2,012
๐๐ป 7
June 2006
|
My morons got damaged (pic), by Curley on Apr 24, 2007 14:52:29 GMT 1, Not really (althought definitely possible), POW prints are all packed without padding and have clearance in them, so a print does not touch the tip of the tube as you put the lid on. I do agree to send them back because they are willing to replace them, just wondering really if people are honest, how many caused the damage themselves? and what do you gain by purposely damaging the print?
I sure that he means accidently damaging it whilst removing it from the tube.
no doubt a few will have been damaged that way, i know i have been close a few times. 
Not really (althought definitely possible), POW prints are all packed without padding and have clearance in them, so a print does not touch the tip of the tube as you put the lid on. I do agree to send them back because they are willing to replace them, just wondering really if people are honest, how many caused the damage themselves? and what do you gain by purposely damaging the print? I sure that he means accidently damaging it whilst removing it from the tube. no doubt a few will have been damaged that way, i know i have been close a few times. |
|
|
|
My morons got damaged (pic), by bobbymeachamjr on Apr 24, 2007 15:04:18 GMT 1, Well, you gain nothing, but the unique thing is that if you damage it yourself, you can blame them and get a new one. As I said on the post above though, I guess they could damage it by doing the squeezing.
well that underlies the other problem - very very poor packaging. If they just rolled the prints in oversized kraft paper these issues would pretty much be non existant. The oversized paper would serve as buffers to the the edges as well as a "grip" to pull the print out smoothly.
Well, you gain nothing, but the unique thing is that if you damage it yourself, you can blame them and get a new one. As I said on the post above though, I guess they could damage it by doing the squeezing. well that underlies the other problem - very very poor packaging. If they just rolled the prints in oversized kraft paper these issues would pretty much be non existant. The oversized paper would serve as buffers to the the edges as well as a "grip" to pull the print out smoothly. |
|
Run Pig Run
Junior Member
๐จ๏ธ 2,437
๐๐ป 9
January 2006
|
My morons got damaged (pic), by Run Pig Run on Apr 24, 2007 18:46:38 GMT 1, get another person at the other end of the tube and turn both the unside corners at the same time, it soon loosens it and you can begin to get it out.
two tips:
1: take the endcaps off first they are often a bit dirty or dusty then wash your hands or wear gloves.
2: make sure before you pull it out (the print not your willy) that the tube isn't dented inwards at the end - it could get caught and fuck it.
get another person at the other end of the tube and turn both the unside corners at the same time, it soon loosens it and you can begin to get it out.
two tips:
1: take the endcaps off first they are often a bit dirty or dusty then wash your hands or wear gloves.
2: make sure before you pull it out (the print not your willy) that the tube isn't dented inwards at the end - it could get caught and fuck it.
|
|
sammyman
New Member
๐จ๏ธ 279
๐๐ป 6
February 2007
|
My morons got damaged (pic), by sammyman on Apr 24, 2007 19:02:46 GMT 1, Most of these prints are damaged on the same spot. The inside corner by the POW stamp. I doubt very much that people are damaging them, but that this is a bad packaging job. Otherwise, the damage would most likely be on the outside edge as it gets caught coming out.
Most of these prints are damaged on the same spot. The inside corner by the POW stamp. I doubt very much that people are damaging them, but that this is a bad packaging job. Otherwise, the damage would most likely be on the outside edge as it gets caught coming out.
|
|
|
|
|
|
My morons got damaged (pic), by beejoir1 on Apr 24, 2007 19:16:18 GMT 1, You guys have to learn how to do the spear chucker a bit more! The only way to remove a print!
You guys have to learn how to do the spear chucker a bit more! The only way to remove a print!
|
|
hexagonsun
New Member
๐จ๏ธ 200
๐๐ป 0
February 2007
|
My morons got damaged (pic), by hexagonsun on Apr 24, 2007 20:58:38 GMT 1, I use a blowtorch to remove the tube.
I use a blowtorch to remove the tube.
|
|
psp500
New Member
๐จ๏ธ 280
๐๐ป 0
June 2006
|
My morons got damaged (pic), by psp500 on Apr 24, 2007 21:02:21 GMT 1, You guys have to learn how to do the spear chucker a bit more! The only way to remove a print!
hahaha correct the only way to do it!
the only problem is the more frisky spear-chucking the step you take and the print pops out you think 'wow that really worked' and then you quickly check to see that there is no damage
You guys have to learn how to do the spear chucker a bit more! The only way to remove a print! hahaha correct the only way to do it! the only problem is the more frisky spear-chucking the step you take and the print pops out you think 'wow that really worked' and then you quickly check to see that there is no damage |
|
dwight
New Member
๐จ๏ธ 539
๐๐ป 285
November 2006
|
My morons got damaged (pic), by dwight on Apr 25, 2007 1:06:00 GMT 1, I think that they get damged on the corner like this...
-the print isn't rolled straight which leaves corners exposed sticking out further
-when the print shifts from end to end (because pow doesn't bother to put any padding on the ends), it hits that corner on the inside endcap and bends.
I think that they get damged on the corner like this...
-the print isn't rolled straight which leaves corners exposed sticking out further
-when the print shifts from end to end (because pow doesn't bother to put any padding on the ends), it hits that corner on the inside endcap and bends.
|
|
Tyler Durden
New Member
๐จ๏ธ 742
๐๐ป 1
February 2007
|
My morons got damaged (pic), by Tyler Durden on Apr 25, 2007 13:23:48 GMT 1, Tried the patented spear chucking technique to get the Kwan prints out the tube. Gave up and eventually twisted the print out the opposite way to the way it was rolled. Packed in tighter than the commuter train in rush hour, but now flattened out and looking great.
Tried the patented spear chucking technique to get the Kwan prints out the tube. Gave up and eventually twisted the print out the opposite way to the way it was rolled. Packed in tighter than the commuter train in rush hour, but now flattened out and looking great.
|
|
dwight
New Member
๐จ๏ธ 539
๐๐ป 285
November 2006
|
My morons got damaged (pic), by dwight on Apr 26, 2007 0:51:45 GMT 1, A friend of mine got his morons today and the print alignment is piss poor. The numbers are only about half green where they should be because they were misaligned when it was printed. I suggested he send it back...I know that I would. Anybody else had this happen? It was so bad that it actually made the print look like a mess-up that should have been thrown out...
A friend of mine got his morons today and the print alignment is piss poor. The numbers are only about half green where they should be because they were misaligned when it was printed. I suggested he send it back...I know that I would. Anybody else had this happen? It was so bad that it actually made the print look like a mess-up that should have been thrown out...
|
|
pw
New Member
๐จ๏ธ 308
๐๐ป 1
October 2006
|
My morons got damaged (pic), by pw on Apr 26, 2007 1:53:00 GMT 1, A friend of mine got his morons today and the print alignment is piss poor. The numbers are only about half green where they should be because they were misaligned when it was printed. I suggested he send it back...I know that I would. Anybody else had this happen? It was so bad that it actually made the print look like a mess-up that should have been thrown out...
same thing here.
looks like they did the green in a bit of a rush!
A friend of mine got his morons today and the print alignment is piss poor. The numbers are only about half green where they should be because they were misaligned when it was printed. I suggested he send it back...I know that I would. Anybody else had this happen? It was so bad that it actually made the print look like a mess-up that should have been thrown out... same thing here. looks like they did the green in a bit of a rush! |
|
dwight
New Member
๐จ๏ธ 539
๐๐ป 285
November 2006
|
My morons got damaged (pic), by dwight on Apr 26, 2007 3:41:42 GMT 1, are you sending yours back?
are you sending yours back?
|
|
